Hi all,
I have question again on SKXBEE. I would like to ask, if i am connecting UART connector (Tx, Rx) which is output at 3.3V on my device to the SKXBEE (Tx, Rx), can it work??? I read the SKXBEE manual and know that actually X-Bee module on the SKXBEE work at 3.3V, the 5V supply is step down in order to let the XBee module work. I will connect the 5V supply separately to the SKXBEE and Tx and Rx which output at 3.3V to SKXBEE respectively. Can it work???
Thanks in advance