2 SKXBee send and receive Data

[lambertlai]

I using 2 SKBee for send and receive data information.
I connect to Arduino board (use battery only, no USB cable), which mean 1 SKXBee connect Arduino board function is send or receive data information,
anothe SKXBee connect to USB and PC monitoring, edit or send back to Arduino board the data information.
So how to configuration the XCTU and the Arduino code? Thanks

[yonghui]

hi,


for xtcu not much things u can configure. u will need to set the correct baudrate according to the xbee module. then go to terminal tab, thats the place the data in out will be display, u can click on show HEX button to show hexadecimal values of the data. if u wish to send packets of data u can click Assemble packet button.
u can develop gui and computer side too, cytron's robot head to toe magazine has an example program for that. pls refer

on the arduino board, programming to control the uart serial communication is needed.

regards,
yh

[hyng]

We just come out with a tutorial on SKXBee. Please follow the tutorial below

http://tutorial.cytron.com.my/2011/07/30/xbeexbee-pro-wireless-communicate-with-microcontroller/

[hyng]

For Arduino with XBee, here is another tutorial.

http://tutorial.cytron.com.my/2011/08/13/project-14-wireless-temperature-logging/

Please go through it and try to test on them.