Help! Xbee AT command.
Posted:
Sun Dec 18, 2011 10:59 amby Myline
Hi guys,from cytron tutorial,the example show 1 way digital communication rite.
Somebody know how to modify it to become analog form
which means the system is continuously monitoring in every second.
Re: Help! Xbee AT command.
Posted:
Sun Dec 18, 2011 11:11 amby Myline
There are many pins for input and output in Xbee pro either analog or digital form,
what command is used to specific the destination i set to input(digital form) Xbee.
For example,if my input is link to one sensor,then sensor(digital form)
is specific to 1 destination of input(digital form) on Xbee.What command is using for?
Simple word,a digital sensor link to input of Xbee using what command
used to specific the destination of input and in digital way communication...
Re: Help! Xbee AT command.
Posted:
Mon Dec 19, 2011 2:57 pmby ober
You can refer to one of Cytron's DIY project,
PR20: XBee-Standalone Control and Monitoring. It configure the analog input on the receiving site and output PWM on another XBee module. Should be helpful.