Page 1 of 1

trigger the IO port of xbee

PostPosted: Tue Jan 31, 2012 2:28 pm
by lockman_akim
hye everyone,

is that possible to trigger the IO port of xbee module when it receive a serial data. For example, when it receive "B" (ASCII) then the D0 port will turn high. Can it work? if yes, how to set it and what is the AT command?

Re: trigger the IO port of xbee

PostPosted: Thu Feb 02, 2012 4:38 pm
by sich
I'm not familiar with XBee but afaik user cannot run custom code on XBee module.
A quick search yields Programmable XBee. However, this product is not in Cytron's list.

If you want to read analog value on XBee #1 and output PWM on XBee #2, it's possible.