Cytron Technical Forum

I having the problem ..i am using xbee series 2 with the arduino xbee shield.. ,Arduino using Uno R3
>>one xbee series 2 i set to AT mode for Tx, another one xbee series 2 set to API for Rx
>> my project is need to get rssi and deplay at the lcd screen
>>As i know the pwm0 pin from xbee series 2 is not conneted to arduino board
>>How can i get the data out and display at the lcd screen?

sataman WROTE:I having the problem ..i am using xbee series 2 with the arduino xbee shield.. ,Arduino using Uno R3
>>one xbee series 2 i set to AT mode for Tx, another one xbee series 2 set to API for Rx
>> my project is need to get rssi and deplay at the lcd screen
>>As i know the pwm0 pin from xbee series 2 is not conneted to arduino board
>>How can i get the data out and display at the lcd screen?

Really interested to know how to set/configure the XBee to be AT for TX, while API for RX.

As I know, XBee is transceiver. So, no need setting which one TX and RX.
What is the 1 module transmit, it's same to the another 1 receive. As until know, I just use XBee Series 1.