Convert baud rate 34800 (Sensor Atlas Scientific) to baud ra

[Hidayah]

hye there....please help me...
i want to send data from sensor that read by arduino uno to zigbee (Xbee)....at hyper terminal, the data had been display by using com arduino. but the problem is i want to get the data from xbee.. im used 2 xbee, first is transmitter and second is receiver.. the xbee cannot display the data because difference baud rate...

how i want to convert the data baud rate 34800 to 9600?

[robosang]

Just change the baudrate in Arduino lah.... Arduino Serial.begin

BTW, is 34800 or 38400?

[shahrul]

pH sensor use baudrate 38400, XBee use baudrate 9600.
You can't connect sensor directly to XBee.

There is 2 way.
1. Change baudrate XBee to 38400, using X-CTU
2. Use Arduino to interfacing both. Use 2 Serial Port or software serial.

[atuk5259]

another way is change baudrate for ph controller....pls refer datasheet first...i think module from atlas scientific got command to change baudrate....

[sahniana]

for ph circuit 5.0, to change baudrate from 38400 to 9600
1. connect at default baudrate 38400.
2. send "z4" + <cr> @ chr(13)
3. disconnect.
4. connect at baudrate 9600.