Cytron Bluetooth Module problem

Bluetooth, XBee, RF......

Cytron Bluetooth Module problem

Postby Ali_Challenger » Tue Oct 28, 2014 8:56 pm

Dear Cytron Technical Forum,
I got "Cytron Bluetooth Module" online from cytron, and when I test them according to the tutorial by using "XBee Starter Kit without module" , using AT commands and set both switches to AT, the first one it works fine without any problem but, the second one dose not shows any response, as shown in photos Help me Please. Thank you
Attachments
okokok.png
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby Idris » Wed Oct 29, 2014 9:29 am

Hi Ali_Challenger,

Did you use the same setting on HyperTerminal for 2nd BlueBee?

Steps to AT command (default)
STEP 1:
1. Set Mode switch to AT.
2. Power up the module.
Result: You can configure the BlueBee with baudrate 38400.
STEP 2:
1. Power up the module.
2. Set Mode switch to AT.
Result: You can configure the BlueBee with baudrate 9600.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: Cytron Bluetooth Module problem

Postby Ali_Challenger » Wed Oct 29, 2014 3:02 pm

Hi Idris, thank you for the quick reply
Yes I did same and changed the baudrate to (110,300,1200,2400,4800,9600,19200,38400,57600,115200) also didn't get any response, and just tried with X-CTU also same no response. :!: :?:
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby ober » Wed Oct 29, 2014 4:44 pm

Is the slide switch being pushed to AT?
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: Cytron Bluetooth Module problem

Postby Ali_Challenger » Wed Oct 29, 2014 5:02 pm

Yes the switch is at "AT" and the status LED blinking slowly.
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby Idris » Thu Oct 30, 2014 9:06 am

In that case, you can fill up the Technical Support form (link). Our Technical Support team will follow up on your problem.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: Cytron Bluetooth Module problem

Postby Ali_Challenger » Thu Oct 30, 2014 10:57 am

Thank you so much I will fill up the form now.
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby Ali_Challenger » Thu Nov 06, 2014 11:20 am

Thank you CYTRON crew I received the Bluetooth Module and it works perfectly.
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby Ali_Challenger » Sun Nov 23, 2014 8:44 pm

Good evening:
Regarding to the useful tutorial by CYTRON "Connect Android Bluetooth to BlueBee",
can you please tell me what is the ARDUINO sketch and the AT command settings for the BlueBee. in order to complete the tutorial.

Thanks.
Ali Challenger
Master Student @ FKEKK-MENC-UTEM
Mob.0187895080
https://www.facebook.com/pages/Challeng ... 8039157929
User avatar
Ali_Challenger
Apprentice
 
Posts: 37
Joined: Tue Oct 28, 2014 8:07 pm
Location: Melaka

Re: Cytron Bluetooth Module problem

Postby Idris » Mon Nov 24, 2014 8:47 am

Hi Ali_Challenger, that tutorial shows how to connect Android apps to BlueBee through bluetooth medium. In order to see the data just open the terminal with selected COM port. Then, from the data, you can program your microcontroller to suit with your project application.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Next

Return to Wireless Device

Who is online

Users browsing this forum: No registered users and 11 guests

cron