Hello,
I have a problem in getting an output number based on the tutorial : http://tutorial.cytron.com.my/2014/05/1 ... hz-module/
I have connected LM35, and use https://github.com/CytronTechnologies/A ... _UART_LM35 coding. But nothing came out.
I just follow the procedure and connect RF to arduino and another RF to UC00A. But also nothing came out.
So, i remove all the wire and tried again using this coding https://github.com/CytronTechnologies/A ... /UART_LM35 which is for RF 434mhz module. The result came out. Which show that i have done a correct wiring on LM35. However this code is not compatible with RF 433MHz module.
So what is the problem here? Need a fast answer.... TQ