Page 1 of 1

[Solved]ESPresso Lite V2.0 "wifi shield not present"

PostPosted: Wed Mar 21, 2018 5:44 pm
by peterchua93
Hi,

I am trying to connect ESPresso Lite V2.0 with cytron uno, i followed this link with the topic "SIMPLE IOT APPLICATION WITH ARDUINO UNO"https://tutorial.cytron.io/2017/02/14/espresso-lite-v2-with-at-firmware/.I followed exactly the same steps and run it, the serial monitor only showed wifi shield not present. May i know what is the problem?

Thanks

Re: [Solved]ESPresso Lite V2.0 "wifi shield not present"

PostPosted: Thu Mar 22, 2018 11:18 am
by bengchet
Hi,

Please provide some photos or screenshots on hardware setup, Arduino IDE serial monitor etc for easier troubleshooting.

Also attach your current sketch here for us to take a look.

Thanks.

Re: [Solved]ESPresso Lite V2.0 "wifi shield not present"

PostPosted: Thu Mar 22, 2018 11:45 am
by peterchua93
bengchet WROTE:Hi,

Please provide some photos or screenshots on hardware setup, Arduino IDE serial monitor etc for easier troubleshooting.

Also attach your current sketch here for us to take a look.

Thanks.

Hi beng chet,
is there any ubidots library for me to send data to ubidots through arduino uno attached with espresso lite v2.0?

Thanks