Cytron Technical Forum


http://forum.cytron.io/

Output

http://forum.cytron.io/viewtopic.php?f=11&t=10862

Page 1 of 1

Output

PostPosted: Wed Mar 02, 2011 7:10 pm
by skullo
I wanted to ask whether if I want to produce output is another example like the motor circuit where I have to make a connection to the RFID circuit, whether at the LED or buzzer? or where?

Re: Output

PostPosted: Wed Mar 02, 2011 11:48 pm
by shahrul
What output? All connect to PIC.

Re: Output

PostPosted: Thu Mar 03, 2011 3:04 am
by skullo
can or not RFID circuit combine with another circuit?

Re: Output

PostPosted: Thu Mar 03, 2011 7:32 am
by shahrul
skullo WROTE:can or not RFID circuit combine with another circuit?

You can interface RFID Reader into PIC. Then, other I/O PIC, you can connect to many other device. See example RFID.

Re: Output

PostPosted: Thu Mar 03, 2011 9:29 am
by robosang
skullo WROTE:can or not RFID circuit combine with another circuit?


Not really clear what are you asking about.

You are asking to integrate a RFID circuit with another circuit, like bare board? Or you are referring to integrate RFID reader with another circuit? Shahrul have show you a good example. Or you are asking whether you can modify Cytron DIY RFID project to do other stuff?

Clearly.... you are not familiar with microcontroller :D

Study more and do some simple project such as LED blinking with some switches....