How to connect RFID to forward reverse motor circuit?

RFID reader, Reader/Writer, Tag.....

How to connect RFID to forward reverse motor circuit?

Postby adhha_90 » Fri Mar 11, 2011 1:46 am

I want to connect the motor circuit to RFID which is the motor rotate forward when user scan a tag. Which is the motor act as the output. The problem is where should I connect the motor circuit switch at the RFID board? I had try connect it at L.E.D. port but it doesn't function. Hope anybody can give the solution.
adhha_90
Greenhorn
 
Posts: 2
Joined: Tue Dec 28, 2010 10:42 pm

Re: How to connect RFID to forward reverse motor circuit?

Postby shahrul » Fri Mar 11, 2011 5:34 am

Seen that you are not using microcontroller. RFID easily can connect to PIC and DC Motor also easily can connect to PIC using motor driver.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: How to connect RFID to forward reverse motor circuit?

Postby hyng » Fri Mar 11, 2011 2:10 pm

Use RFID to control motor without any main board (microcontroller)? What RFID board you are using? I'm not sure about it. But as far as i know, there should be a main board to interface both module.
User avatar
hyng
Moderator
 
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am


Return to RFID

Who is online

Users browsing this forum: No registered users and 7 guests

cron