Cutting Donut Board

Soldering, Multimeter, Plier, Cutter, Screwdriver.....

Cutting Donut Board

Postby Ville » Mon Aug 22, 2011 4:13 am

Hello,

I would like to ask a little silly question,

I would like to cut a donut board into smaller pieces.
Is there any "cheap" way cut it cleanly as I dont have any pcb cutter.

thanks for any advise ^^
Ville
Newbie
 
Posts: 14
Joined: Thu Sep 02, 2010 6:48 am

Re: Cutting Donut Board

Postby yonghui » Mon Aug 22, 2011 10:05 am

hi,


i always use normal cutter to cut down some guides on both side, then break it carefully by force


rgds,
yh
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm

Re: Cutting Donut Board

Postby hyng » Mon Aug 22, 2011 10:45 am

Yes, agree with yh method. Using normal box cutter will do. :)
User avatar
hyng
Moderator
 
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am

Re: Cutting Donut Board

Postby paracetamol » Mon Mar 06, 2017 8:29 am

Pretty much agree with the advices given above. Just cut it carefully, don't shake your hand. That will do, try it mate.
paracetamol
Fledgling
 
Posts: 1
Joined: Mon Mar 06, 2017 8:19 am


Return to Tool and Equipment

Who is online

Users browsing this forum: No registered users and 1 guest

cron