Brian Griffin WROTE:Port B could be shared with an A/D module input or a comparator input at default, hence the inability to be an output. You need to disable those first if the pin is needed to be operating at digital output.
Hi all. With ur help, I have learned how I can configure z bits too and i've done my first PR11 DIY project. Now,I've read most lcd tutorials and I changed the 8 bit PR11 DIY into 4 bit PR11 DIY and z lcd reads z temp value but it says
"[HD44780]controller received data whilst busy". I can't solve it out and I need ur help. below is z entire program. Thank you!
wow,I got it. i missed to put the delay.