Fingerprint reader (UART) SN-FPR-UART

LED Blinking, Walking with Cytron Servo, Displaying RFID, Multi-function Mobile Robot......

Fingerprint reader (UART) SN-FPR-UART

Postby Marvin_G » Mon Dec 17, 2012 5:50 pm

Hye guys, anyone used Fingerprint reader (UART) SN-FPR-UART before? i wanted to know how can i get all data in the DSP processor at once.
Marvin_G
Apprentice
 
Posts: 38
Joined: Mon Oct 01, 2012 1:00 pm

Re: Fingerprint reader (UART) SN-FPR-UART

Postby gadgetng » Mon Dec 17, 2012 7:50 pm

Yes. I used the fingerprint with PIC before. It is also working fine with the VB provided when i testing it for the first time with UC00A.
gadgetng
Discoverer
 
Posts: 97
Joined: Tue Jul 24, 2012 11:20 am

Re: Fingerprint reader (UART) SN-FPR-UART

Postby shahrul » Mon Dec 17, 2012 8:14 pm

I use Fingerprint Reader but not try to get all data or image.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: Fingerprint reader (UART) SN-FPR-UART

Postby Marvin_G » Tue Dec 18, 2012 10:42 am

gadgetng WROTE:Yes. I used the fingerprint with PIC before. It is also working fine with the VB provided when i testing it for the first time with UC00A.


nice. so basically you just send command based on the manual is it?
Marvin_G
Apprentice
 
Posts: 38
Joined: Mon Oct 01, 2012 1:00 pm

Re: Fingerprint reader (UART) SN-FPR-UART

Postby gadgetng » Tue Dec 18, 2012 10:44 am

Marvin_G WROTE:
gadgetng WROTE:Yes. I used the fingerprint with PIC before. It is also working fine with the VB provided when i testing it for the first time with UC00A.


nice. so basically you just send command based on the manual is it?

Also refer to PR29, diy kit.
gadgetng
Discoverer
 
Posts: 97
Joined: Tue Jul 24, 2012 11:20 am

Re: Fingerprint reader (UART) SN-FPR-UART

Postby Marvin_G » Wed Dec 19, 2012 4:08 pm

shahrul WROTE:I use Fingerprint Reader but not try to get all data or image.


i'm using linux and i wanted to send command to the device but failed. below is my command:

echo "0xF5,0x01,0x00,0x01,0x03,0,0x03,0xF5" >/dev/ttyUSB0

i also used cutecom to send those command but the device does not give any respond. Any idea why?
Marvin_G
Apprentice
 
Posts: 38
Joined: Mon Oct 01, 2012 1:00 pm

Re: Fingerprint reader (UART) SN-FPR-UART

Postby zhenning » Wed Dec 19, 2012 11:25 pm

Marvin_G WROTE:
shahrul WROTE:I use Fingerprint Reader but not try to get all data or image.


i'm using linux and i wanted to send command to the device but failed. below is my command:

echo "0xF5,0x01,0x00,0x01,0x03,0,0x03,0xF5" >/dev/ttyUSB0

i also used cutecom to send those command but the device does not give any respond. Any idea why?



Please stop posting in multiple post. Just stick to one since your problem is the same problem. Easier for people to reply and read.
zhenning
Enthusiast
 
Posts: 351
Joined: Thu Dec 30, 2010 12:32 am

Re: Fingerprint reader (UART) SN-FPR-UART

Postby robosang » Thu Dec 20, 2012 10:04 am

Agreed with zhenning :mrgreen:
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Fingerprint reader (UART) SN-FPR-UART

Postby thinkpositivex » Sat Dec 29, 2012 8:48 pm

dear all...

i'm a new in fingerprint reader (UART) SN-FPR-UART ...i have a question regarding on this product because after all connection is connected i run on visual basic8 ,select baud rate 19200 and open port 8 detected as per stated on manual but unfortunately this system hang and i no window show connection successfully.another question is hyper terminal,is it compulsory to run this finger print with hyper terminal and it effect,pls explained and advice me.....thank you... :P...
thinkpositivex
Freshie
 
Posts: 7
Joined: Sat Dec 29, 2012 8:33 pm

Re: Fingerprint reader (UART) SN-FPR-UART

Postby zhenning » Sat Dec 29, 2012 9:34 pm

thinkpositivex WROTE:another question is hyper terminal,is it compulsory to run this finger print with hyper terminal and it effect


Did it work on hyperterminal?
zhenning
Enthusiast
 
Posts: 351
Joined: Thu Dec 30, 2010 12:32 am

Next

Return to DIY Project Set

Who is online

Users browsing this forum: No registered users and 11 guests

cron