GUI+microcontroller without dedicated PC

LED Blinking, Walking with Cytron Servo, Displaying RFID, Multi-function Mobile Robot......

GUI+microcontroller without dedicated PC

Postby navidbox » Tue Apr 08, 2014 9:11 am

My intention is to have the embedded device (ATMEGA32 microcontroller) located at a remote

location somewhere connected to the internet (connected via Ethernet) connected (via CANBUS) to

the fuel cell system for measurement of data (Current and temperature of fuel cell).
The end-user/or client must be able to view these acquired data through the browser on the

internet. The main aim of this project is to prevent any pc dedicated merely as a web server,

therefore I would like to know your general solutions.
(I noticed that I can implement a web server on this micro-controller, But how to assign the

GUI (Graphical Interface Strategy) for showing the data on the browser for the users?--I mean I

am not clarified if the designed GUI (LabVIEW or C-SHARP) should be located in the internet

(Host & Domain solution) or there are some better solutions for it!
Of course, here the communication between the microcontroller and this GUI is the problem of my

task!
navidbox
Newbie
 
Posts: 8
Joined: Thu Jun 16, 2011 2:20 am

Re: GUI+microcontroller without dedicated PC

Postby ober » Thu Apr 10, 2014 8:43 am

I am not in to Ethernet :) But maybe this tutorial by one of our engineers might be helpful?
An Arduino Room Monitoring Web Server
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm


Return to DIY Project Set

Who is online

Users browsing this forum: No registered users and 5 guests

cron