Page 1 of 1

GUI+microcontroller without dedicated PC

PostPosted: Tue Apr 08, 2014 9:11 am
by navidbox
My intention is to have the embedded device (ATMEGA32 microcontroller) located at a remote

location somewhere connected to the internet (connected via Ethernet) connected (via CANBUS) to

the fuel cell system for measurement of data (Current and temperature of fuel cell).
The end-user/or client must be able to view these acquired data through the browser on the

internet. The main aim of this project is to prevent any pc dedicated merely as a web server,

therefore I would like to know your general solutions.
(I noticed that I can implement a web server on this micro-controller, But how to assign the

GUI (Graphical Interface Strategy) for showing the data on the browser for the users?--I mean I

am not clarified if the designed GUI (LabVIEW or C-SHARP) should be located in the internet

(Host & Domain solution) or there are some better solutions for it!
Of course, here the communication between the microcontroller and this GUI is the problem of my


Re: GUI+microcontroller without dedicated PC

PostPosted: Thu Apr 10, 2014 8:43 am
by ober
I am not in to Ethernet :) But maybe this tutorial by one of our engineers might be helpful?
An Arduino Room Monitoring Web Server