Connection for 8 pin PIC12F675 at uic000B
Posted:
Wed Apr 11, 2012 6:24 pmby akim9903
Hi,
Anybody can help me. I'm going to program PIC12F675 IC but the adaptor is cater for 18pin & 28/40pin type.
Can explain the connection to me. very-very urgent.
thank you.
Re: Connection for 8 pin PIC12F675 at uic000B
Posted:
Wed Apr 11, 2012 8:49 pmby ABSF
Refer to this tutorial on how to connect UIC00B to 12F675. Would be easier if you got UIC-A.
A PIC 12F675 tutorial.
http://www.best-microcontroller-project ... onnections:
Allen
Re: Connection for 8 pin PIC12F675 at uic000B
Posted:
Thu Apr 12, 2012 8:16 amby akim9903
Not really understand. Can modify from UIC-S adaptor?
Re: Connection for 8 pin PIC12F675 at uic000B
Posted:
Thu Apr 12, 2012 10:41 amby hyng
The adapter you mean is UIC-S? In this case the UIC-S will not help. You have to pull out the programmer pins from the PIC to ICD box header as shown in the figure at page 38 of the User's Manual. The ICD Box Header 2x5 is
http://www.cytron.com.my/viewProduct.php?pcode=CN-IDC-BOX-10&name=10%20Ways%20Straight%20Box%20Header Then you can connect the programmer cable of UIC00B to that box header.
Re: Connection for 8 pin PIC12F675 at uic000B
Posted:
Fri Apr 13, 2012 6:48 amby ABSF
- UIC00B 10 pin Box plug
- UIC-A adaptor
Plug the 10 pin box plug from UIC00B to UIC-A then refer to the diag below:
- UIC-A to 12F675 connection
Allen