128x128 TFT + PIC32

[takao21203]

Modules arrived today.
https://plus.google.com/117731549339430 ... RUHgDUQmhj

Connected one to a PIC32 (MX210D-016).

It's not ready yet, just some photos from the construction. I will make a page + post a picture when it is working.

[takao21203]

Got the LED blinking yesterday on the PIC32.

MPLABX is slow on my small netbook when using PIC32.
Configuration is more difficult, but looking up websites, I got along with the timer.

Reading the display PDF, it looks as it supports scrolling.
Also the chip itself supports 160x128 as well- I tried one of these displays a year ago.
From the PDF it was not clear to me it supports scrolling.

Is it the same chip perhaps, since resolutions/interface are the same? Was a 1.8" TFT, now using 1.44"

[ober]

Thanks for sharing, nice project!

[takao21203]

It has a webpage now, added SD card slot, compass sensor.
http://aranna.altervista.org/dragonsnes ... -oled-pcb/

wired up the SD card slot today.

I removed the MX210D16 and changed to 120D32.
ICSP is on different pins and no USB.

[takao21203]

Update here: https://plus.google.com/b/1167511473934 ... rCE2P9Cnia

Got the SD card / file system working today. Most of the 32K memory is used up! 70%.

Also have a compass sensor now and a 512K serial FLASH. Need to change again to 64K or 128K chip. Guess I buy some 128K chips since there is no meaningful saving.

Actually I had some trouble to get the SD card slot working- then I found I had LAT instead of PORT for the serial input.