MPLABX Logic Analyzer

Discussion about projects that used PIC Microcontroller, Hardware Interface, Programming Algorithm and etc......

MPLABX Logic Analyzer

Postby aru » Wed Apr 18, 2018 9:35 am

When the output pin is simulated in the Logic Analyzer, I can only get ONE CYCLE of the waveform.
In MPLAB, I can see many cycles of the waveform.
In MPLABX, I can get only one cycle.
Can anyone advise how to set it up so we can see multiple cycles of the waveform in MPLABX?
aru
Novice
 
Posts: 21
Joined: Fri Jan 05, 2018 2:53 pm

Re: MPLABX Logic Analyzer

Postby aru » Thu Apr 19, 2018 12:04 pm

Found that the Logic Analyzer cannot be used for output waveforms below 100Hz.
For 100Hz, I can see only one cycle of the waveform. For higher frequencies, I can see multiple waveforms.
This could be due to a default setting in the Logic Analyzer properties of 10,000 buffer size.
For 10,000 instruction cycles, for a clock frequency of 1MHz, it is right that we can get 1 cycle.

I consider this resolved.
aru
Novice
 
Posts: 21
Joined: Fri Jan 05, 2018 2:53 pm


Return to PIC Microcontroller

Who is online

Users browsing this forum: No registered users and 11 guests

cron