BTBee Connection

[philli3]

hi all,

I am having problem of bluetooth connection between 2 computers

This is the tutorial provided by cytron http://tutorial.cytron.com.my/2011/08/1 ... tooth-bee/

I have setup the connecion as shown in the Computer A and Computer B, but my problem is After i openned hyperterminal from both sides, only COMPUTER A can send and COMPUTER B receives, which is not 2 way communication as shown in the tutorial

Anyone has idea what's going on with my connections ?

baudrate = 9600
BT Module = BTBEE + XBee Shield (possible to be used according to the technical staff of cytron)

[ober]

Hi, can you show us what is the Bluetooth dongle being use? And how is the Bluetooth Bee being connected to computer? Using SKXBee?

[philli3]

Arduino Uno

BTBEE from cytron
http://tutorial.cytron.com.my/2011/08/1 ... tooth-bee/

XBee Shield
http://www.cytron.com.my/viewProduct.ph ... HagqSFjOo=

[robosang]

Er.... I don have Bluetooth Bee, thinking to have one because is cheap, but I thought that Bluetooth is only salve module, it cannot communicate among themselves. So you are using 2 Bluetooth Bee module?

How is the hardware setup, photo will be helpful.

[philli3]

the tutorial mentions it can communicate both ways through hyperterminal

even if it's a slave module, shouldnt it be able to receive rather than send data ? which mine is totally different way (computer b can send rather than receive only)

[robosang]

So one of the computer is using Bluetooth dongle in that case, right? What is the configuration on the Xbee Shield? and also the Bluetooth Bee module. A clear photo of the hardware setup would help a lot.