Bluebee + Skx BeeBoard

Talk about Arduino board, sheilds. Sharing Arduino projects, program, problems, solutions, suggestions..... many more, all are welcome.

Bluebee + Skx BeeBoard

Postby fatinathirah » Fri Mar 08, 2013 10:32 am

Hi, Im having problem with the Bluebee + Skx BeeBoard that I bought. The thing is my laptop cannot detect the product. Acoording to http://tutorial.cytron.com.my/2011/08/1 ... h-bee/#3.0 Test your BTBEE using AT mode and http://tutorial.cytron.com.my/2012/07/2 ... h-bluebee/ the laptop should detect by itself. I need help like really urgent! please! its for my fyp. tq.
fatinathirah
Freshie
 
Posts: 7
Joined: Fri Mar 08, 2013 10:25 am

Re: Bluebee + Skx BeeBoard

Postby robosang » Fri Mar 08, 2013 11:16 am

How is the hardware setup? Can share a photo?

Is the baudrate correct? Have the SKXBee driver being installed?
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Bluebee + Skx BeeBoard

Postby fatinathirah » Fri Mar 08, 2013 3:51 pm

After connecting everything just like in the USB Starter Kit User Manual (http://www.cytron.com.my/usr_attachment ... Manual.pdf) , I download the USB driver from http://www.cytron.com.my/viewProduct.php?pcode=SKXBEE and extract it into my computer. According to FTDI Driver Installation guide (http://www.cytron.com.my/usr_attachment ... (FT_000093).pdf) page 6, it says that after unzip the driver file into the pc, then connect the usb port to pc, if the fevice is based on ft2232, the microsoft composite device will automatically loaded. Unfortunately that doesn't happen.
Attachments
FxCam_1362758355543.jpg
this how the hardware looks
fatinathirah
Freshie
 
Posts: 7
Joined: Fri Mar 08, 2013 10:25 am

Re: Bluebee + Skx BeeBoard

Postby robosang » Fri Mar 08, 2013 5:36 pm

I don think the driver will install automatically the 1st time. The window composite driver is just basic USB driver, the guide also stated that after the composite driver is loaded, the Found New Hardware wizard will appear.

Did you see any message pop up when you plug the USB in?

Do you see any USB Serial Port (COMx) under device manager?
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Bluebee + Skx BeeBoard

Postby gadgetng » Sat Mar 09, 2013 11:19 am

ya, you need to install the driver manually.
gadgetng
Discoverer
 
Posts: 97
Joined: Tue Jul 24, 2012 11:20 am

Re: Bluebee + Skx BeeBoard

Postby fatinathirah » Sun Mar 10, 2013 10:59 pm

yup2 it is in COM5. but when i plugged in, nothing pops up. how to solve it ya? im really confused right now.
fatinathirah
Freshie
 
Posts: 7
Joined: Fri Mar 08, 2013 10:25 am

Re: Bluebee + Skx BeeBoard

Postby fatinathirah » Sun Mar 10, 2013 11:04 pm

if the port can already be detected, doesn't that means the driver has already been installed? but there is no sign of Found New Hardware wizard appearing.
fatinathirah
Freshie
 
Posts: 7
Joined: Fri Mar 08, 2013 10:25 am

Re: Bluebee + Skx BeeBoard

Postby fatinathirah » Sun Mar 10, 2013 11:46 pm

Problem Solved~! My bluebee is working! btw thanks for ur help. If i encounter anymore problem, surely i'm going to ask u guys again. thanks a lot~!
fatinathirah
Freshie
 
Posts: 7
Joined: Fri Mar 08, 2013 10:25 am

Re: Bluebee + Skx BeeBoard

Postby robosang » Mon Mar 11, 2013 7:32 am

You should share what is the problem, so other can know and solve the problem . :mrgreen:
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm


Return to Arduino Based

Who is online

Users browsing this forum: No registered users and 44 guests

cron