Arduino Output Pin Current for MD30C and MD10C

Talk about Arduino board, sheilds. Sharing Arduino projects, program, problems, solutions, suggestions..... many more, all are welcome.

Arduino Output Pin Current for MD30C and MD10C

Postby jimmywb » Tue Oct 24, 2017 11:24 pm

I am curious what the current draw is for Arduino output pins connected to the MD10C and MD30C. I would love to run both motor controllers off of one Arduino UNO and so I want to make sure that I will be under the individual pin absolute maximum of 40mA and the Arduino GND pin limit of 200mA. Thanks in advance!
jimmywb
Greenhorn
 
Posts: 2
Joined: Tue Oct 24, 2017 11:19 pm

Re: Arduino Output Pin Current for MD30C and MD10C

Postby waiweng83 » Wed Oct 25, 2017 4:50 pm

The PWM and DIR pins on the MD10C and MD30C only draw less than 0.5mA at 5V. Thus it is safe to use with Arduino.
With the power of dream, nothing is impossible...
User avatar
waiweng83
Moderator
 
Posts: 205
Joined: Wed Apr 15, 2009 2:17 pm


Return to Arduino Based

Who is online

Users browsing this forum: No registered users and 4 guests

cron