makeruno listed as unknown USB device.

Talk about Arduino board, sheilds. Sharing Arduino projects, program, problems, solutions, suggestions..... many more, all are welcome.

makeruno listed as unknown USB device.

Postby sureshsol » Mon Mar 26, 2018 5:29 pm

Hi, I received the Makeruno kit .

When I install the driver for the makerono, windows shows it as "unknown USB device ".

Tried reinstalling the driver but still the same.
there are 2 yellow LED and running blue lights when I connect to the PC USB.

Please advise how I can fix this?

Suresh
sureshsol
Freshie
 
Posts: 4
Joined: Mon Mar 26, 2018 5:24 pm

Re: makeruno listed as unknown USB device.

Postby sureshsol » Mon Mar 26, 2018 7:05 pm

I managed to get it to work, I had to reboot the PC.

Can run some basic programs.

thank you
sureshsol
Freshie
 
Posts: 4
Joined: Mon Mar 26, 2018 5:24 pm

Re: makeruno listed as unknown USB device.

Postby ober » Tue Mar 27, 2018 5:13 am

sureshsol WROTE:I managed to get it to work, I had to reboot the PC.

Can run some basic programs.

thank you

Good to hear it is working.

Mind sharing what Operating System you are using? Mac or Windows or Linux?
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1441
Joined: Wed Apr 15, 2009 1:03 pm

Re: makeruno listed as unknown USB device.

Postby sureshsol » Tue Mar 27, 2018 10:16 pm

Hi Ober,

I still have the problem.

I tried in on a DELL note book and a HP notebook the driver did not not recognize the Device.

Rebooting did not improve.

When I tried on the XPS I had rebooting worked. But if I unplug/reset the device the device become inaccessible.

I am using Windows 10 on all the PC's.

will give a call in the morning for some troubleshooting. I think it is a driver incompatiblity with Windows 10 at least from my issue.

Suresh

Suresh
sureshsol
Freshie
 
Posts: 4
Joined: Mon Mar 26, 2018 5:24 pm

Re: makeruno listed as unknown USB device.

Postby ober » Wed Mar 28, 2018 4:25 am

That's weird, 90% of our office laptop are Windows 10 and CH340G (on Maker UNO) is used nearly every day here without any issue if the driver is installed properly. We did see an issue on Mac OS before, but again, after the correct version of driver, Mac OS also do not have issue using Maker UNO (or CH340G).
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1441
Joined: Wed Apr 15, 2009 1:03 pm

[resolved] Re: makeruno listed as unknown USB device.

Postby sureshsol » Sun Apr 29, 2018 6:25 pm

Just to update the forum the issue was with the USB cable. Swapping the USB cable resolved the problem.

Suresh
sureshsol
Freshie
 
Posts: 4
Joined: Mon Mar 26, 2018 5:24 pm

Re: makeruno listed as unknown USB device.

Postby ober » Mon Apr 30, 2018 10:46 am

Good to hear that!
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1441
Joined: Wed Apr 15, 2009 1:03 pm


Return to Arduino Based

Who is online

Users browsing this forum: No registered users and 9 guests

cron