about pt2272 latch

[rpeace06@gmail.com]

hi, i want to use pt2272 l4 ic for my project to control home application like lamp and fan.
but i want to know how it work
let say, if i press switch for lamp at the transmitter and release it, it output will be 1(at receiver ic) and lamp will on.
can i press another switch for fan at the transmitter and release it, to on the fan at the same time the light still on?

for your information, i already buy pt2272 m4 (momentary) but it only can send one data at one time
i cannot press one switch and another switch together...

PLEASE HELP ME BECAUSE I NEED TO FIND ANOTHER SOLUTION IF I CANNOT USE THIS TYPE OF IC...

[robosang]

I don think you can send 2 input state, though I never test it, but from the logic itself, that is not applicable. Just my instinct , who can verify?

[shahrul]

You can use microcontroller + rf module. You can send many byte through rf.

[ZaM]

lau combine pt2272 ngan PIC ok jgk bos

[rpeace06@gmail.com]

first of all tq to all member...
i've found a solution
i will use flip flop to do latching
tq..

[robosang]

So how is the circuit looks like? Share a photo with us