parking management system based on Raspberry Pi pico and HMI

Works done? Proud of it? Show off here! Let's see what you've built can help inspire others.

parking management system based on Raspberry Pi pico and HMI

Postby Mars » Fri Oct 29, 2021 3:54 pm

Materials to be used

1、STONE STWI101WT-01

2、FTP thermal printer head

3、Raspberry Pi pico

4、Coin-operated machine

Function

The control function is displayed on the serial screen, the main interface selects the floor, after entering the main interface selects the parking space, at the same time it will display the parking space number in the text box on the top right, then selects the stay time, it is two scrolling text selectors, then also the same will display the order information in the text box on the top right, according to the fixed unit price which multiplies with the stay time to get the total price. Then only when the parking space and the stay time are selected, you can go to the payment button, otherwise it is invalid. After entering the payment screen, a coin acceptor will be used. Then the screen will show the number of coins to be put in and the number of coins already put in. After the coins have been put in, a payment success message will be displayed. Then you can choose to print a small ticket to print the place number and time on the thermal paper.

Circuit

I have design a circuit by myself in order to drive many components, and the overall circuit diagram is like this, the upper left corner is the communication socket and power supply socket, below there is a buzzer (not actually used in the circuit), there is a light-emitting diode on the right, and the lower right corner is a 30pin fpc for connecting the print head.

Image
Mars
Novice
 
Posts: 28
Joined: Tue Jun 22, 2021 11:10 am

Re: parking management system based on Raspberry Pi pico and

Postby Mars » Fri Oct 29, 2021 3:55 pm

Code

CODE: SELECT_ALL_CODE
from machine import UART,Pin

from time import sleep

import _thread

import rp2

from array import array

import ascii_ku

import speed_motor

from os import uname

#import sys

uart1 = UART(0, baudrate = 115200, tx =Pin(0), rx = Pin(1))

floor1 = ['f', 'l', 'o', 'o', 'r','1']

floor2 = ['f', 'l', 'o', 'o', 'r','2']

floor3 = ['f', 'l', 'o', 'o', 'r','3']

button_cmd = [16,1]

selector_cmd = [16,129]

 

print(uname()[0])

delaytime = 0.0000001 # Printer clock delay

 

coin = Pin(22, Pin.IN,Pin.PULL_UP)

coin_num = 0

 

motor = speed_motor.motor_control(2, 3, 4, 5) # Initialize the printer's internal stepper motor pins, corresponding to the a+/a-/b+/b- of the stepper motor

mov_bit = 0

 

PRINTER_DIN = Pin(20, Pin.OUT)

PRINTER_CLK = Pin(19, Pin.OUT)

PRINTER_LAT = Pin(18, Pin.OUT, Pin.PULL_UP)

 

STB1 = Pin(6, Pin.OUT, Pin.PULL_DOWN)

STB2 = Pin(7, Pin.OUT, Pin.PULL_DOWN)

STB3 = Pin(8, Pin.OUT, Pin.PULL_DOWN)

STB4 = Pin(9, Pin.OUT, Pin.PULL_DOWN)

STB5 = Pin(14, Pin.OUT, Pin.PULL_DOWN)

STB6 = Pin(15, Pin.OUT, Pin.PULL_DOWN)

 

lock = _thread.allocate_lock()

 

ascii_code = ascii_ku.ascii_code() # Importing an ascii character library

 

# shuru = 'aa'

# line_word = []

# for item in range(len(shuru)):

#     line_word.append(shuru[item])

# line_num = len(shuru)

# bottom_line_num = len(shuru)%

# global motor_speed = 0

# global line = 0

 

# if len(shuru) > 6:

#     motor_speed = len(shuru) % 6

#     if (len(shuru) % 6) == 0:

#         motor_speed = 12

# else:

#     motor_speed = len(shuru)

# # print(motor_speed)

#

# line = (len(shuru) // 12) + 1

# if (len(shuru) % 12) == 0:

#     line -= 1

lins = 0

supper = 0

slower = 0

 

danjia = 0

# _thread.start_new_thread(motor.run_stop, (0.005*motor_speed, 26*line))

# _thread.start_new_thread(motor.run_stop, (motor_speed, line))

# _thread.start_new_thread(motor.run_stop, (0.03, 56))

def pay(pay):

    global coin_num

    line_word = {'line_word1':['s','i','t','e',':','F','1','-','0'],'line_word2':['0','d','a','y','2','h','o','u','r'],'line_word3':['t','o','t','a','l',':','4','.','0'],'line_word4':['T','o','t','a','l',':','4','.','0']}

    line_wors = {'line_word1':['U','n','i','t',':','2','.','0','0'],'line_word2':['T','o','t','a','l',':','4','.','0'],

                 'line_word3':['U','n','i','t',':','2','.','0','0'],'line_word4':['T','o','t','a','l',':','5','.','0']}

#     line_word1 = ['S','i','t','e',':','F','1','-','0']

#     line_word2 = ['1','D','a','y','1','H','o','u','r']

#     line_word3 = ['U','n','i','t',':','2','.','0','0']

#     line_word4 = ['T','o','t','a','l',':','5','.','0']

#     line_word1[8]=str(pay[0])

#     line_word2[0]=str(pay[1])

#     line_word2[4]=str(pay[2])

#     line_word4[6]=str(pay[3])

    (line_word['line_word1'])[8]=str(pay[0])

#     (line_word['line_word2'])[0]=str(pay[1])

#     (line_word['line_word2'])[4]=str(pay[2])

#     (line_word['line_word4'])[6]=str(pay[3])

    sleep(1)

    uart1.write('ST<{"cmd_code":"set_value","type":"image_value","widget":"image_value4","value":'+str(pay[3])+'}>ET')

#     sleep(2)

#     print(line_word.get('line_word'+str(1))[0])

#     print('zfdszfz',line_word)

#     sleep(2)

#     uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message5","text":"F1 - '+pay[0]+'"}>ET')

#     uart1.sendbreak()

#     sleep(1)

#     uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message6","text":"'+str(pay[1])+'"}>ET')

#     uart1.sendbreak()

#     sleep(1)

# #     uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message22","text":"'+str(pay[2])+'"}>ET')

#     uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message8","text":"'+str(pay[3])+'"}>ET')

    while True:

        if coin.value()==0:

            coin_num += 1

            print("Number of coins deposited:",coin_num)

            sleep(0.1)

            uart1.write('ST<{"cmd_code":"set_value","type":"image_value","widget":"image_value2","value":'+str(coin_num)+'}>ET')

            if coin_num == pay[3]:

                uart1.write('ST<{"cmd_code":"set_visible","type":"widget","widget":"image37","visible":true}>ET')

               

               

        if uart1.any()>1:

            rx2 = []

            data_name2 = ''

            bin_data = uart1.read(40)

            uart1.sendbreak()

            rx1 = list(bin_data)

            for item in rx1:

                rx2.append(chr(item))

            print(rx2)

            if rx1[3:5:1] == button_cmd:

                data_name_len = rx1[6] - 1

                data_name = rx2[7:data_name_len+6:1]

                data_name2 = ''.join(data_name)

                print(data_name2)

                if data_name2 == 'back':

                    break

                elif data_name2 == 'print' and coin_num == pay[3] and rx1[13] == 2:

                    data_name2=''

                    _thread.start_new_thread(motor.run_stop, (9, 4))

                    for iii in range(1,3):

                        for linss in range(32):

                            supper=slower=0

                            for lins in range(9):

#                                 temp_list=ascii_code.code.get(('line_word'+str(iii))[lins])

#                                 print(temp_list,type(temp_list))

                                if (line_word.get('line_word'+str(iii))[lins]).islower():

                                    word_size24 (ascii_code.code.get(line_word.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

                                    slower += 1

                                else:

                                    last_word_size32 (ascii_code.code.get(line_word.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

                                    supper += 1

                   

                        sleep(6)

#                     for iii in range(1,2):

#                         for linss in range(32):

#                             supper=slower=0

#                             for lins in range(9):

# #                                 temp_list=ascii_code.code.get(('line_word'+str(iii))[lins])

# #                                 print(temp_list,type(temp_list))

#                                 if (line_wors.get('line_word'+str(iii))[lins]).islower():

#                                     word_size24 (ascii_code.code.get(line_wors.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

#                                     slower += 1

#                                 else:

#                                     last_word_size32 (ascii_code.code.get(line_wors.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

#                                     supper += 1

#                     sleep(6)

#                     for iii in range(1,2):

#                         for linss in range(32):

#                             supper=slower=0

#                             for lins in range(9):

# #                                 temp_list=ascii_code.code.get(('line_word'+str(iii))[lins])

# #                                 print(temp_list,type(temp_list))

#                                 if (line_wors.get('line_word'+str(iii))[lins]).islower():

#                                     word_size24 (ascii_code.code.get(line_wors.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

#                                     slower += 1

#                                 else:

#                                     last_word_size32 (ascii_code.code.get(line_wors.get('line_word'+str(iii))[lins]), linss%32, lins%12, supper, slower)

#                                     supper += 1

def floor1def():

    day_jia = 0

    hour_jia = 0

    day_flag = False

    hour_flag = False

    price_flag = False

    posltion = False

    zongjia = 0

    pay1 = [0,0,0,0]

 

    print("floor1 now")

#     uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message3","text":"2.00$/H"}>ET')

    uart1.sendbreak()

    while True:

        if uart1.any()>1:

            rx2 = []

            data_name2 = ''

            bin_data = uart1.read(40)

            uart1.sendbreak()

            rx1 = list(bin_data)

            for item in rx1:

                rx2.append(chr(item))

            print(rx2)

            if rx1[3:5:1] == button_cmd:

                data_name_len = rx1[6] - 1

                data_name = rx2[7:data_name_len+6:1]

                data_name2 = ''.join(data_name)

                print(data_name2)

                if data_name2 == 'back':

                    break

                elif data_name2 == 'position':

                    posltion = True

                    pay1[0]=rx2[15]

                    write1(rx2[15])

                elif data_name2 == 'pay' and posltion and price_flag:

                    uart1.write('ST<{"cmd_code":"open_win","type":"window","widget":"window7"}>ET')

                    pay(pay1)

#                 if data_name2 == 'pay' and posltion = True and (day_flag or hour_flag):

#                     posltion = True

#                     uart1.write('ST<{"cmd_code":"open_win","type":"window","widget":"window7"}>ET')

            if rx1[3:5:1] == selector_cmd:

                data_name_len = rx1[6] - 4

                data_name = rx2[7:data_name_len+7:1]

                data_name2 = ''.join(data_name)

                print(data_name2)

                if data_name2 == 'time_day1':

                    pay1[1]=rx2[19]

                    write2(ord(rx2[19]))

                    day_jia = ord(rx2[19])

                    day_flag = True

                elif data_name2 == 'time_hour1':

                    pay1[2]=rx2[20]

                    write3(ord(rx2[20]))

                    hour_jia = ord(rx2[20])

                    hour_flag = True

            if hour_flag or day_flag:

                price_flag = True

                zongjia = (day_jia*48) + (hour_jia*2)

                pay1[3]=zongjia

                print(str(zongjia))

                uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message4","text":"'+str(zongjia)+'"}>ET')

                hour_flag = day_flag = False

 

def floor2def():

    pass

 

def floor3def():

    pass

 

def write1(num):

    #print(ss)

    for item in range(49,55):

        uart1.write('ST<{"cmd_code":"set_image","type":"image","widget":"image1_'+chr(item)+'","image":"nocar_bg"}>ET')

    uart1.write('ST<{"cmd_code":"set_image","type":"image","widget":"image1_'+num+'","image":"selectedcar_bg2"}>ET')

    uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message1","text":"F1 - '+num+'"}>ET')

   

def write2(num):

#     danjia = 1

    uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message2","text":"'+str(num)+'"}>ET')

#     if danjia == 1:

#         uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message3","text":"2.00$/H"}>ET')

 

def write3(num):

#     danjia = 1

    uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message22","text":"'+str(num)+'"}>ET')

#     if danjia == 1:

#         uart1.write('ST<{"cmd_code":"set_text","type":"edit","widget":"message3","text":"2.00$/H"}>ET')

 

 

 

def last_word_size32 (word_line, linss, lins, supper, slower):

    for mov_bit in range((supper*32)+(slower*24)):

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(0)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    for mov_bit in range(31, -1, -1):

        word_bit = (word_line[linss] >> mov_bit)&0b00000000000000000000000000000001

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(word_bit)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    for mov_bit in range(352-((supper*32)+(slower*24))):

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(0)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    if (supper*32)+(slower*24) < 192:

        PRINTER_LAT.value(0)

        STB1.value(1)

        STB2.value(1)

        STB3.value(1)

        STB4.value(1)

        sleep(0.005)

        STB1.value(0)

        STB2.value(0)

        STB3.value(0)

        STB4.value(0)

        PRINTER_LAT.value(1)

    else:

        PRINTER_LAT.value(0)

        STB4.value(1)

        STB5.value(1)

        STB6.value(1)

        sleep(0.005)

        STB4.value(0)

        STB5.value(0)

        STB6.value(0)

        PRINTER_LAT.value(1)

#         PRINTER_LAT.value(0)

#         STB1.value(1)

#         STB2.value(1)

#         STB3.value(1)

#         STB4.value(1)

#         STB5.value(1)

#         STB6.value(1)

#         sleep(0.005)

#         STB1.value(0)

#         STB2.value(0)

#         STB3.value(0)

#         STB4.value(0)

#         STB5.value(0)

#         STB6.value(0)

#         PRINTER_LAT.value(1)

       

def word_size24 (word_line, linss, lins, supper, slower):

    for mov_bit in range((supper*32)+(slower*24)):

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(0)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    for mov_bit in range(23, -1, -1):

        word_bit = (word_line[linss] >> mov_bit)&0b000000000000000000000001

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(word_bit)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    for mov_bit in range(360-((supper*32)+(slower*24))):

        PRINTER_CLK.value(0)

        sleep(delaytime)

        PRINTER_DIN.value(0)

        PRINTER_CLK.value(1)

        sleep(delaytime)

    if (supper*32)+(slower*24) < 192:

        PRINTER_LAT.value(0)

        STB1.value(1)

        STB2.value(1)

        STB3.value(1)

        sleep(0.005)

        STB1.value(0)

        STB2.value(0)

        STB3.value(0)

        PRINTER_LAT.value(1)

    else:

        PRINTER_LAT.value(0)

        STB4.value(1)

        STB5.value(1)

        STB6.value(1)

        sleep(0.005)

        STB4.value(0)

        STB5.value(0)

        STB6.value(0)

        PRINTER_LAT.value(1)

#         PRINTER_LAT.value(0)

#         STB1.value(1)

#         STB2.value(1)

#         STB3.value(1)

#         STB4.value(1)

#         STB5.value(1)

#         STB6.value(1)

#         sleep(0.005)

#         STB1.value(0)

#         STB2.value(0)

#         STB3.value(0)

#         STB4.value(0)

#         STB5.value(0)

#         STB6.value(0)

#         PRINTER_LAT.value(1)

 

while True:

    if uart1.any()>1:

        rx2 = []

        data_name2 = ''

        bin_data = uart1.read(40)

        uart1.sendbreak()

        rx1 = list(bin_data)

        for item in rx1:

            rx2.append(chr(item))

        print(rx2)

        if rx2[7:13:1] == floor1:

            floor1def()

        elif rx2[7:13:1] == floor2:

            floor2def()

        elif rx2[7:13:1] == floor3:

            floor3def()

 

for linss in range(32):

    supper=slower=0

    if linss < 32:

        for lins in range(len(line_word)):

#             if lins//12:

#                 break

            if (line_word[lins].isupper() or line_word[lins].isdigit() or line_word[lins].isspace()):

                last_word_size32 (ascii_code.code.get(line_word[lins]), linss%32, lins%12, supper, slower)

                supper += 1

            elif (line_word[lins].islower()):

                word_size24 (ascii_code.code.get(line_word[lins]), linss%32, lins%12, supper, slower)

                slower += 1

    else:

        if linss == 32:

            sleep(5.8)

        for lins in range(motor_speed):

            if (line_word[lins].isupper()):

                last_word_size32 (ascii_code.code.get(line_word[12]), linss%32, lins%12, len(line_word))

#     elif:

#         _thread.start_new_thread(motor.run_stop, (motor_speed, line))

#     for linss in range(32):

#         for lins in range(len(line_word)):

#             if (line_word[lins].isupper()):

#                 last_word_size32 (ascii_code.code.get(line_word[lins]), linss, lins, len(line_word))

 

line_word.clear()
Mars
Novice
 
Posts: 28
Joined: Tue Jun 22, 2021 11:10 am

Re: parking management system based on Raspberry Pi pico and

Postby Mars » Fri Oct 29, 2021 3:56 pm

Mars
Novice
 
Posts: 28
Joined: Tue Jun 22, 2021 11:10 am

Re: parking management system based on Raspberry Pi pico and

Postby ober » Sat Nov 20, 2021 9:09 am

Nice product! Thanks for sharing
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: parking management system based on Raspberry Pi pico and

Postby EricRiley » Fri Mar 18, 2022 7:41 pm

Nice product? That's a SICK product!!!
ER
EricRiley
Fledgling
 
Posts: 1
Joined: Fri Mar 18, 2022 7:39 pm


Return to Project Showcase

Who is online

Users browsing this forum: No registered users and 2 guests