SMS Application Using GSM TC35

[Idris]

Device:
~ Cytron SK40C + LCD16x2
~ PIC16F887
~ GSM TC35 Module
~ Handphone

Sent SMS: '0' > Both LED OFF
Sent SMS: '1' > LED 1 ON, LED 2 OFF
Sent SMS: '2' > LED 1 OFF, LED 2 ON
Sent SMS: '3' > Both LED ON

Video:

[shahrul]

Good work.
Idris, new id name, first post.

[Idris]

I don't know how to edit the previous user name "redips_id", so I create new.. hehe..

[ABSF]

I went to "www.mudah.com.my" to look for TC35 module but they are not listed any more. Was it cheaper then the ones from HK ebay?

Thanks for sharing your COOL project. I like it very much.

Allen

[hyng]

cool~

[ABSF]

Did you try the voice port (JP6)? Looks like you can call someone and talk to him too.

Allen

[Idris]

Not yet. Maybe someday I will try, and maybe someday I will create my own phone.

[ober]

Idris, great work!

[nenenekuku]

Mr Idris,

I'm taking alarm system with fire +smoke sensor as my input whereelse buzzer and auto-dial/sms would be my output.
So far i've done all the sub modules except the auto dial, may i know is it possible to interface this TC35 with Microcontroller (pic or 8051) so i can program it to autodial/sms where this is input indicated?

If yes how would it goes?

I desperately need more info in this and it would be great if you can assist me, Thanks a lot.

[Idris]

Of course that is possible.
You should understand the AT command. Then try communicate with PIC using UART.