tutorial of B106 rotary encoder

Please feedback the issue encountered while using Cytron official website (http://www.cytron.com.my), Cytron Technical Forum and Cytron Tutorial site (http://tutorial.cytron.com.my) here. We greatly appreciate any comments and suggestions too.

tutorial of B106 rotary encoder

Postby Sunghow » Tue Feb 14, 2017 11:12 am

i using B106 and arduino mega for my project....
any coding and tutorial to share here???
thank
Sunghow
Greenhorn
 
Posts: 3
Joined: Tue Feb 14, 2017 11:05 am

Re: tutorial of B106 rotary encoder

Postby Idris » Tue Feb 14, 2017 6:03 pm

Hi Sunghow,

What is B106?

My advice, next time, please... (if possible)
- explain in detail what is your project.
- explain what problem do you face, but before that please do explore/experimnet first (make Prof Google as your best friend).
- share few clear photos of your hardware setup.
- any related information for others to refer.

Thanks.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: tutorial of B106 rotary encoder

Postby Sunghow » Thu Feb 16, 2017 10:16 am

ESB B106 rotary encoder...
i try using this encoder to calculate distance and determine the direction of rotation
the online resources about this component are very limited ....

http://cytron.com.my/p-b-106-23983
the conponent is shown as above link
Sunghow
Greenhorn
 
Posts: 3
Joined: Tue Feb 14, 2017 11:05 am

Re: tutorial of B106 rotary encoder

Postby Sunghow » Thu Feb 16, 2017 10:21 am

my project is navigation an AGV
i need to using information from rotary encoder to guide the AGV
Beside that, my AGV is using Vexta brushless motor
so i only need suitable coding to explore this component
Sunghow
Greenhorn
 
Posts: 3
Joined: Tue Feb 14, 2017 11:05 am

Re: tutorial of B106 rotary encoder

Postby Idris » Fri Feb 17, 2017 8:51 pm

Hi Sunghow,

Maybe you could start with the basic concept of this product. You can refer to Quadrature Encoder tutorial.

Thanks.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang


Return to Cytron Website, Forum & Tutorial Site Feedback

Who is online

Users browsing this forum: No registered users and 5 guests