Espresso Lite V2.0 DHT22 Failed to read

Sharing on Tips and Tricks of IoT - hacking, improvement.

Espresso Lite V2.0 DHT22 Failed to read

Postby akahmed » Thu Nov 23, 2017 11:15 am

I bought two sets of Espresso Lite V2 IOT starter Kit.
I used the Espert _0060_DHT examples sketch on both sets but both failed.

ESPertBoardType = 2
ESPert: Failed to read temperature from DHT sensor!
ESPert: Failed to read humidity from DHT sensor!


I installed all the required libraries for Espresso Lite.

The sensor was working when tested with Arduino Uno.

Please advice.
akahmed
Greenhorn
 
Posts: 3
Joined: Thu Nov 23, 2017 11:07 am

Re: Espresso Lite V2.0 DHT22 Failed to read

Postby Idris » Thu Nov 23, 2017 11:29 am

Hi akahmed,

Could you share a few clear photos of your hardware setup?
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 344
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: Espresso Lite V2.0 DHT22 Failed to read

Postby akahmed » Thu Nov 23, 2017 12:32 pm

See attached.
Attachments
EspressoLite.jpg
akahmed
Greenhorn
 
Posts: 3
Joined: Thu Nov 23, 2017 11:07 am

Re: Espresso Lite V2.0 DHT22 Failed to read

Postby akahmed » Sat Nov 25, 2017 8:18 am

Any progress?
akahmed
Greenhorn
 
Posts: 3
Joined: Thu Nov 23, 2017 11:07 am


Return to Tips and Tricks of IoT

Who is online

Users browsing this forum: No registered users and 1 guest