Page 1 of 1

Espresso Lite V2.0 DHT22 Failed to read

PostPosted: Thu Nov 23, 2017 11:15 am
by akahmed
I bought two sets of Espresso Lite V2 IOT starter Kit.
I used the Espert _0060_DHT examples sketch on both sets but both failed.

ESPertBoardType = 2
ESPert: Failed to read temperature from DHT sensor!
ESPert: Failed to read humidity from DHT sensor!


I installed all the required libraries for Espresso Lite.

The sensor was working when tested with Arduino Uno.

Please advice.

Re: Espresso Lite V2.0 DHT22 Failed to read

PostPosted: Thu Nov 23, 2017 11:29 am
by Idris
Hi akahmed,

Could you share a few clear photos of your hardware setup?

Re: Espresso Lite V2.0 DHT22 Failed to read

PostPosted: Thu Nov 23, 2017 12:32 pm
by akahmed
See attached.

Re: Espresso Lite V2.0 DHT22 Failed to read

PostPosted: Sat Nov 25, 2017 8:18 am
by akahmed
Any progress?