MDDS30 and Remote Control Operation

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

MDDS30 and Remote Control Operation

Postby Cryton1 » Sun Feb 03, 2019 9:05 am

Hi, does the MDDS30 operate from a remote control receiver? I have read reports of error lights activating when using with R/C.
I want to make a remote control lawnmower powered by 2 rear wheels operating in a skid steer (tank) operation and free spinning front wheels for stabilization. I want to operate both wheels from 1 stick on my R/C transmitter so the channel mixing will need to be handled by the esc as my remote doesn't have that capability.
I searched for MDDS30 remote control and had 0 results so I would love to hear from anyone who has had any experience with the above mentioned setup.

Thanx.
Cryton1
Fledgling
 
Posts: 1
Joined: Sat Feb 02, 2019 9:55 am

Re: MDDS30 and Remote Control Operation

Postby ober » Sat Feb 09, 2019 12:11 pm

Yes, that is possible because is fairly straight forward. Just change the channel on the receiver to the MDDS30.

Here is video using both joystick to control forward, back and pivoting:
https://youtu.be/nPxv-j1DYSA
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1400
Joined: Wed Apr 15, 2009 1:03 pm


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 2 guests

cron