4 Channel DC Motor Driver (FD04A Flexibot Driver)

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

4 Channel DC Motor Driver (FD04A Flexibot Driver)

Postby wws » Sat Jan 09, 2010 5:10 pm

I just bought this 4 Channel DC Motor Driver (FD04A Flexibot Driver).
I have some question about it.
Is it the 2x7 IDE is connected to microcontroller (supplied by 5v)?
If the rated voltage of the motor is 12v, mean we have to power this circuit with 12v?
Mean relay to trip the 12v circuit is built in this board?

If i want to build the driver circuit myself with L293 or L298, how to i control the speed ?
Program the microcontroller?

Thank.
wws
Freshie
 
Posts: 6
Joined: Tue Jan 05, 2010 2:50 pm

Re: 4 Channel DC Motor Driver (FD04A Flexibot Driver)

Postby ober » Sat Jan 09, 2010 5:57 pm

I thought the User's Manual of FD04A explained that. There is a table of pin function on page 3. You need to give 5V to FD04A from your microcontroller board.

There is 2 power, one is for logic operation, another for motor. Please understand this first. There is no relay on this board.

Please refer to PR23 for sample.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1440
Joined: Wed Apr 15, 2009 1:03 pm

Re: 4 Channel DC Motor Driver (FD04A Flexibot Driver)

Postby sich » Tue Jan 12, 2010 3:58 pm

ober WROTE:Please refer to PR23 for sample.

I think ober means PR19 :P
http://www.cytron.com.my/viewProduct.php?pid=EjgZPDciExkkJTY5BAYjIeBpPkmZooCOMTLGzOojw7Y=&store=
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 12 guests

cron