Having problem with SC16A... Need help!!

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

Re: Having problem with SC16A... Need help!!

Postby hyng » Mon Apr 25, 2011 11:48 am

Hi, the maximum current for SC16A on servo power part is more than enough for 16 servo motors. I have personally tested it with 16A load continuously for half an hour and it is still working. May i know what is your application? Actually 10 servo motor not necessary to consume more than 6A. My personal thought 6A would be enough for 10 servo motor. :P

Another method that student usually do is connect a 7805 voltage regulator on EACH servo motor's power provided you use Lead Acid battery or Lithium Polymer Battery.
User avatar
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am

Re: Having problem with SC16A... Need help!!

Postby wgk3629 » Mon Apr 25, 2011 2:48 pm

thanks 4 the advice.well my project is similar to PR18.using 10 servo,sc16a,sk40c,pic16f877a. to compare my analysis with actual hardware and apply some control engineering methods for better control and stability.
Posts: 3
Joined: Sat Apr 23, 2011 12:18 am


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 1 guest