hardware to use to program servo using sc08A?

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

hardware to use to program servo using sc08A?

Postby angelo » Fri Apr 13, 2012 10:50 pm

hello, what type of hardware & software to download/buy if i want program my servo's? need help here...
thanks.
angelo
Newbie
 
Posts: 11
Joined: Sat Sep 10, 2011 10:47 pm

Re: hardware to use to program servo using sc08A?

Postby shahrul » Fri Apr 13, 2012 11:11 pm

You can use PIC. The way is, you can connect servo directly to PIC or you can use servo controller.
Here the example code, servo motor and servo controller.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: hardware to use to program servo using sc08A?

Postby hyng » Sat Apr 14, 2012 10:50 am

You can refer to DIY project PR18.
User avatar
hyng
Moderator
 
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am

Re: hardware to use to program servo using sc08A?

Postby Idris » Sat Apr 14, 2012 10:51 am

What project you want to create?
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 384
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: hardware to use to program servo using sc08A?

Postby angelo » Sat Apr 14, 2012 11:40 pm

i bought SC08A & UC00A earlier and using GUI to control my servo. But now i wanted to learn to program servo using PIC but not sure which hardware should i buy. can i use these hardware SK40C,ic PIC-16F877A, UIC008 to program my servo? what else do i need? need some opinion here. thanks..
angelo
Newbie
 
Posts: 11
Joined: Sat Sep 10, 2011 10:47 pm

Re: hardware to use to program servo using sc08A?

Postby kl84 » Mon Apr 16, 2012 9:29 am

angelo WROTE:i bought SC08A & UC00A earlier and using GUI to control my servo. But now i wanted to learn to program servo using PIC but not sure which hardware should i buy. can i use these hardware SK40C,ic PIC-16F877A, UIC008 to program my servo? what else do i need? need some opinion here. thanks..

I see that Cytron provides both .c and .h with the name "SK40C_16F877A_SC08A". So I guess it works straight away on SK40C + PIC16F877A and you can program it using UIC00B to program the chip.
User avatar
kl84
Amateur
 
Posts: 166
Joined: Thu Jul 08, 2010 12:14 pm


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 4 guests

cron