Cytron Technical Forum

im at final stage…
Robot will send some string to the HyperTerminal, then it will move a little left and right to test the motor. Once you get the “Ready!” string… i receive this at hyperterminal......
but when i press w for example nothing happen… i need help here...
the connection between xbee and hyperterminal is ok...
so ... i thing maybe the programming is the problem...
http://tutorial.cytron.com.my/wp-conten ... eRobot.zip

i really need advise here.. hopefully someone will help me...

Hi mohamadhanifnayan,

After doing the Xbee-WiFi configuration, did you test the both way communication? I mean laptop send data to Xbee-WiFi, Xbee-WiFi send data to laptop.

is that what u mean

this is my result


after that i cannot press anymore.... sw2 or sw1
i receive xbee wifi S6B.. is should be no problem right !!!!..

Hmm, it looks like all the configuration are OK. But I still can't trace the problem.

You are using the same hardware as tutorial?

yerp... but for motor i use SPG50-20K..
i receive xbee wifi S6B ... your S6... is that ok...

thank..

Mind sharing the photo of the hardware/wiring of the robot? Do show the connection from microcontroller to the SKXBee with the XBee-WiFi.

i totally follow from this http://tutorial.cytron.com.my/2013/01/1 ... xbee-wifi/

I don follow this thread, but I am interested to see the setting under the SKXBee. Can you share another photo without the SKXbee?