Re: Newbie wheel chair question
Posted: Wed Oct 16, 2013 9:14 amThat is not a wheel chair, is a robot base using high power DC motor. We did it to demonstrate theMDS40A motor driver.
There are many ways to build this robot base, but I believe you need to get the DC motor and mechanical part as the mounting bracket and wheel. Check out the DC motor here:http://www.cytron.com.my/listProductGroup.php?pid=MS4SJBE9IxQQGygCDQMFEWGivoFaR5T9yM0GcVrxaNA=
As for controller, we are using IFC. There are User's Manual and Example code for download.
Of course, you can also use other type of controller such as MC40SE, Arduino and many more.
There are many ways to build this robot base, but I believe you need to get the DC motor and mechanical part as the mounting bracket and wheel. Check out the DC motor here:http://www.cytron.com.my/listProductGroup.php?pid=MS4SJBE9IxQQGygCDQMFEWGivoFaR5T9yM0GcVrxaNA=
As for controller, we are using IFC. There are User's Manual and Example code for download.
Of course, you can also use other type of controller such as MC40SE, Arduino and many more.