Page 1 of 1

MD30C external switches

PostPosted: Thu Dec 28, 2017 6:13 am
by liteace
The MD30C, I see on the PDF your using switches like this:

micro.PNG
micro.PNG (232.19 KiB) Viewed 1997 times


Do these type of switches need to be pressed and held for the motor to run ?

Could I use a switch like this:

SPDT.PNG
SPDT.PNG (153.84 KiB) Viewed 1997 times


So when the controller is powered up and the switch is set the motor will run in CW or CCW

Thanks

Re: MD30C external switches

PostPosted: Fri Dec 29, 2017 6:52 am
by ober
Yes, you can use the toggle switch as you show.