Stacking multiple HAT-MDD10

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

Stacking multiple HAT-MDD10

Postby teojb » Wed Sep 23, 2020 11:29 am

I am trying to stack 3 x MDD10 on a rpi and there seems to be a conflict in the i2c addresses. Is there a way to configure the i2c address?
teojb
Fledgling
 
Posts: 1
Joined: Wed Sep 23, 2020 11:19 am

Re: Stacking multiple HAT-MDD10

Postby Idris » Mon Sep 28, 2020 11:49 am

Hi teojb,

Do you refer to HAT-MDD10? If yes, this HAT is using standard GPIO and PWM pins to operate. It is not I2C. So it only support 1 HAT at a time.

Hope this helps.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 16 guests

cron