Thnxx for the reply Sich. I'm still learning Sich. Correct me if i wrong ya..
Now, the connection to the driver as we can plug to printer port(base on Sherline product)
**ex:
8760 - CNC 4-axis Driver Box and Power Supply
Item details
Weight: 0 kg, 0 grams
Stock: Pre-Order
The components in this driver box are the same as the ones installed in the computer itself when ordering a complete Sherline CNC system. Putting them in a separate box gives you the opportunity to set up a CNC system using a Sherline machine and Sherline stepper motors and drivers, but you can use your own computer and your choice of software to control them. The 8760 driver box has output cables for X-, Y-, Z- and A-axes. It also includes an input cable that connects to the 25-pin parallel (printer) port on your computer. Included with the driver package is a 4 amp power supply and a 2-CD set with the Linux OS and EMC 4-axis software ready to install on your computer if you choose.
**The program :
8326 - Linux/EMC CNC Software on CD
Item details
Weight: 0 kg, 0 grams
Stock: Pre-Order
The Sherline CNC systems that include a computer come with the Linux operating system and EMC (Enhanced Machine Controller) program already installed. A pair of CD's (Linux/EMC CD, Instruction/Utility CD) can be purchased if you wish to duplicate the system Sherline offers on your own computer.
NOTE: Some familiarity with Linux is recommended before attempting to install. Depending on component compatibility in your computer, Sherline cannot guarantee that this operating system will install successfully on your computer. Minimum requirements include 800 MHz or faster CPU, 256MB RAM, and 25-pin parallel port for connection of external 8760 driver box.
One CD contains the Linux Operating System and EMC programs, while the other CD contains instruction files and free utilities.
Linux and EMC are "open source" software and are available for free download from the Internet. Because the Linux OS is a very large download (over 500 MB), it is offered on CD as a convenience and priced to cover our costs of reproduction and handling. These CD's are included free as a backup with the purchase of any Sherline CNC system that includes a computer and also with the 8760 driver box. Free technical support is NOT included when the CD's are purchased as a separate item or with the 8760 driver box. Technical help on Linux is available through the Linux group at
http://www.linux.org. Help on EMC can be found through
http://www.linuxcnc.org.
**OR the complete package:
For the CNC to run according to the drawing that we want's to engrave or cut, they use March3 for the g-code.
Anyway Sich, what is the best size(machine structure) if i want to use your SD028B?
Can this product work like what i want?
**All the product that i post here is now available in KL,by TouchDiy.