UIC00B and PIC24FJ64GB002

Programmer, In-Circuit Debugger, PIC Start-Up Kit, Memory Interface...
Post a reply

UIC00B and PIC24FJ64GB002

Postby eximperial » Wed Oct 27, 2010 4:01 pm

How do i connect the pins for PIC24FJ64GB002? i already connect VDD, PGC, PGD and Vss. MCLR should go to Vpp and VDD? Besides that, the programmer shows an error to check proper capacitance on Vcap. I had also used a 10uF cap there but the error is still there. Help, anyone?
eximperial
Fledgling
 
Posts: 1
Joined: Wed Oct 27, 2010 3:56 pm
Top

Re: UIC00B and PIC24FJ64GB002

Postby ober » Wed Oct 27, 2010 4:54 pm

Hi, can you share a picture of your setup?
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm
Top

Re: UIC00B and PIC24FJ64GB002

Postby kl84 » Thu Oct 28, 2010 9:47 am

MCLR should be connected to Vpp.
User avatar
kl84
Amateur
 
Posts: 166
Joined: Thu Jul 08, 2010 12:14 pm
Top

Re: UIC00B and PIC24FJ64GB002

Postby shiyan » Fri Oct 29, 2010 5:47 pm

eximperial WROTE:How do i connect the pins for PIC24FJ64GB002? i already connect VDD, PGC, PGD and Vss. MCLR should go to Vpp and VDD? Besides that, the programmer shows an error to check proper capacitance on Vcap. I had also used a 10uF cap there but the error is still there. Help, anyone?


Is that surface mount PIC? How do you connect it? Yes, as kl84 said MCLR is VPP.

I don think there should be any capacitor at any pin.... where did you put the cap? Putting it will only make thing worst. :shock:
User avatar
shiyan
Amateur
 
Posts: 189
Joined: Wed Jun 09, 2010 10:59 am
Top

Re: UIC00B and PIC24FJ64GB002

Postby zhenning » Thu Dec 30, 2010 1:27 am

Put a .1uF cap on the power rail near the uC. and there is a cap you and folow the recommended connection on the datasheet
zhenning
Enthusiast
 
Posts: 351
Joined: Thu Dec 30, 2010 12:32 am
Top
Post a reply

Return to PIC Development Tool

Who is online

Users browsing this forum: No registered users and 16 guests