how to program?

[lolo]

how to programmed PIC and liquid level sensor using USB ICSP PIC Programmer V2010.i have purchase 40 pins PIC Start-Up Kit Combo 2 for and gsm for my project.are gsm work automatically with computer?having a problem how to communicate it with the web since i'm using PHP for my web.

[yonghui]

hi lolo,

i am not so familiar with PHP language, but i suggest u to read some on the features of the language specially about the com port/serial port/rs232 communication with PHP. that will help u to find out more on how to interface.

gsm probaly use the serial communication at 5v level, 3.3v which is called UART. PIC has the UART also.


regards,
yh

[lolo]

need an opinion about what language more easy to use,because i need to communicate a web to the device for my project.i use the liquid level sensor to monitor water level connect to PIC and using gsm modem to send back to my system.

[yonghui]

hi ,

means that u will connect the sensor to the pic and the modem to the pic too?

the there will be receiver at computer side.


for pic , suggest you to use c language for programming. most people use tat.


regards,
yh

[shahrul]

Better you program PIC with liquid level sensor first. Forget the other.
After you understand ADC, then goes to GSM and PHP.

[hyng]

Agree with Shahrul. If you are totally a beginner in this, please try with the simplest first like programming a LED blinking to SK40C.

[robosang]

ya ya.... most of them want to fly first before they even know how to walk.... why? Because now, Everyone can fly

[zhenning]

how to programmed PIC and liquid level sensor using USB ICSP PIC Programmer V2010.i have purchase 40 pins PIC Start-Up Kit Combo 2 for and gsm for my project.are gsm work automatically with computer?having a problem how to communicate it with the web since i'm using PHP for my web.

You program the PIC, the liquid level sensor does not need to program but you need to send command to it.

1. To program the PIC, use the Zif kit or connect the programmer to the start up kit.
2. Look for the manual for the programmer and find, MCLR, Vdd, Gnd, PGD, PGC and connect accordingly. Dont forget to power up the PIC.

you need to read the gsm device manual ^_^