Hi, I have a SK40C with a PIC18F4520. I have soldered the LCD onto the board and am using the UIC00B to program the pic. I downloaded the sample LCD code from the cytron website but only the LED's are working correctly. The LCD shows nothing when I burn the hex using the PICKit 2 software. The configuration bits are correctly set in code and are the same in the PICKit 2 application. The solder job is fine, my partners made sure not to damage the board. We used a female header on the board, and the male header on the LCD and simply plug in the 16 pins. I need help as soon as possible so I can continue working on my senior project. The only thing I can think of is if the solder job was lousy, although the backlight works fine. Any help is appreciated.
-Mike