source code for remote mobile robot

Programmer, In-Circuit Debugger, PIC Start-Up Kit, Memory Interface...

source code for remote mobile robot

Postby fana » Thu Jan 22, 2015 12:27 am

how to get source code for UIC00B and PIC 16F887? Please help me :cry: . tq
fana
Freshie
 
Posts: 4
Joined: Thu Jan 22, 2015 12:18 am

Re: source code for remote mobile robot

Postby yonghui » Thu Jan 22, 2015 9:57 pm

Just search for sample projects that are using that particular PIC.
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm

Re: source code for remote mobile robot

Postby ober » Fri Jan 23, 2015 11:42 am

You can try MC40A sample code, it is using PIC16F887. Do check out the User's manual.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: source code for remote mobile robot

Postby fana » Mon Feb 02, 2015 11:21 pm

Untitled.jpg

how to fixed this ?? :roll: :roll: :?: :cry: :cry: :cry:
fana
Freshie
 
Posts: 4
Joined: Thu Jan 22, 2015 12:18 am

Re: source code for remote mobile robot

Postby Idris » Tue Feb 03, 2015 9:10 am

Hi fana,

Based on the picture you share, it seems like you are using PIC16F887 and MPLAB X to compile source code. So why don't you directly upload the code to PIC using MPLAB X too?

Normally we don't set the configuration bit on PICkit 2 software, because it is already set in the hex file.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: source code for remote mobile robot

Postby fana » Wed Feb 04, 2015 4:36 pm

why its running target take long time and not ending? :roll: :roll:
Untitled.jpg


i want to ask, did we need to converting an MPLAB v8 project to MPLAB X?
i use MPLAB X IDE v2.30.. i follow the step based on this link http://tutorial.cytron.com.my/2012/07/0 ... mplab-xc8/
fana
Freshie
 
Posts: 4
Joined: Thu Jan 22, 2015 12:18 am

Re: source code for remote mobile robot

Postby ober » Wed Feb 04, 2015 9:10 pm

Running target means.... the code is being loading into target board, in this case the MC40A and the program is already running.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: source code for remote mobile robot

Postby fana » Thu Feb 05, 2015 11:19 pm

i want to ask, did we need to converting an MPLAB v8 project to MPLAB X?
i use MPLAB X IDE v2.30.. i follow the step based on this link http://tutorial.cytron.com.my/2012/07/0 ... mplab-xc8/
fana
Freshie
 
Posts: 4
Joined: Thu Jan 22, 2015 12:18 am

Re: source code for remote mobile robot

Postby Idris » Fri Feb 06, 2015 8:52 am

If the project file is in MPLAB v8 format and you want to open it with MPLAB X, yes you need to convert.
But, if the project file already in MPLAB X format, then you don't need to convert, you can directly open it on MPLAB X.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 409
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: source code for remote mobile robot

Postby anhtran19932111 » Mon Mar 06, 2017 10:56 am

the code is being loading into target board
anhtran19932111
Freshie
 
Posts: 6
Joined: Thu Aug 25, 2016 5:47 pm


Return to PIC Development Tool

Who is online

Users browsing this forum: No registered users and 4 guests