MD30C with 25 kHz PWM signal

LINIX Brushless, VEXTA Brushless, RC Servo, DC Geared, Linear, Stepper, Tamiya.....

MD30C with 25 kHz PWM signal

Postby Koskinkirva » Mon Mar 29, 2021 7:31 am

I have a idea of using car radiator fan to cool my PC. For this I plan to use MD30C motor driver which should be compatible with car rad fans which are all basically 12V DC brushed motors. The problem is that MD30C supports PWM frequencies up to 20 kHz (by the specs), while PC motherboard and dedicated PC fan controllers all output PWM signal at 25 kHz.

Is it possible to use MD30C with 25 kHz PWM signal? If not, what is a limiting factor here? Maybe it is possible to make a modification to MD30C so it can support 25 kHz PWM?
Koskinkirva
Fledgling
 
Posts: 1
Joined: Mon Mar 29, 2021 7:07 am

Re: MD30C with 25 kHz PWM signal

Postby waiweng83 » Tue Mar 30, 2021 11:11 am

The MD30C can be driven from 25kHz PWM signal, however, the current handling capability will be reduced due to the switching loss of the MOSFET.
You can try it out and as long as the motor current consumption is well below 30A continuously, it should be fine.
With the power of dream, nothing is impossible...
User avatar
waiweng83
Moderator
 
Posts: 208
Joined: Wed Apr 15, 2009 2:17 pm


Return to DC Motor

Who is online

Users browsing this forum: No registered users and 6 guests

cron