MO-SPG-10-150K motor

LINIX Brushless, VEXTA Brushless, RC Servo, DC Geared, Linear, Stepper, Tamiya.....

MO-SPG-10-150K motor

Postby kodcyky » Thu Jun 03, 2010 4:33 pm

Hi,
Can MO-SPG-10-150K 6V dc motor withstand the voltage supplied directly from a 2 cell lipo battery?
The battery rated voltage is 7.4V but i just found out from cytron that the battery is 8.4V after fully charged.
kodcyky
Freshie
 
Posts: 7
Joined: Wed Feb 03, 2010 9:45 am

Re: MO-SPG-10-150K motor

Postby ober » Thu Jun 03, 2010 5:16 pm

kodcyky WROTE:Hi,
Can MO-SPG-10-150K 6V dc motor withstand the voltage supplied directly from a 2 cell lipo battery?
The battery rated voltage is 7.4V but i just found out from cytron that the battery is 8.4V after fully charged.


We do not test the motor out of its specification. Anyway as far as we know, there are applications that drive SPG-10 with 9V DC. Thus, it should be fine to drive with 8.4V.

That is Lipo standard, the rated voltage for single cell is 3.7V, after fully charge is 4.2V. For more that 1 cell, just multiply that figure.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm


Return to DC Motor

Who is online

Users browsing this forum: No registered users and 6 guests

cron