Recreate Project Arduino + 10A Motor Shield + Encoder Motor

LINIX Brushless, VEXTA Brushless, RC Servo, DC Geared, Linear, Stepper, Tamiya.....

Recreate Project Arduino + 10A Motor Shield + Encoder Motor

Postby helmi » Mon Sep 05, 2016 11:20 am

Hello everybody :D

Can someone help me to recreate this project http://tutorial.cytron.com.my/2016/04/0 ... der-motor/ with limited hardwares.

Here is the hardware that I have :

- Arduino UNO
- Cytron 10A Motor Driver Shield (Arduino)
- 1K Resistor
- Male to Male Jumper Wire
- Planetary DC Geared Motor (42mm) 49:1

How can I modify the code to make sure it can works with that limites hardware. Thank you.
helmi
Greenhorn
 
Posts: 2
Joined: Mon Sep 05, 2016 11:04 am

Re: Recreate Project Arduino + 10A Motor Shield + Encoder Mo

Postby ZaM » Mon Sep 05, 2016 5:31 pm

Hi, hardware that you have is enough to recreate this project. For hardware side, you need to solder resistor directly to jumper wire to replace Breakout Shield and for software side, minimal changes is needed, you need to disable Key Press waiting code to run automatically without LCD keypad shield. You need to comment out this line //waitAnyKeyPress();
ZaM
Moderator
 
Posts: 78
Joined: Tue Nov 23, 2010 4:16 pm

Re: Recreate Project Arduino + 10A Motor Shield + Encoder Mo

Postby helmi » Wed Sep 14, 2016 2:22 pm

Thank you.. It's works :D
helmi
Greenhorn
 
Posts: 2
Joined: Mon Sep 05, 2016 11:04 am


Return to DC Motor

Who is online

Users browsing this forum: No registered users and 3 guests

cron