servo motor

LINIX Brushless, VEXTA Brushless, RC Servo, DC Geared, Linear, Stepper, Tamiya.....
Post a reply

servo motor

Postby sabauku » Tue Oct 20, 2009 10:13 pm

act, im still confuse.. c36s 180 dgree have 3 wire and i know how to connect this 3 wire. but for c36s (360 dgree) have 2 wire and no polarity right. which 1 must connect to signal port and another 1 wire must connect to +ve or -ve port?
sabauku
Greenhorn
 
Posts: 3
Joined: Tue Oct 06, 2009 2:41 pm
Top

Re: servo motor

Postby sich » Thu Oct 22, 2009 9:48 am

sabauku, C36S (360 dgree) only has two wires because it has been modified to become a DC motor. It is not a servo anymore. So there's no need to give signal to it. The two wires are the two terminal of the motor inside C36S. Just swap V+ and Gnd to these two wires to turn CW and CCW.
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm
Top

Re: servo motor

Postby sabauku » Fri Oct 23, 2009 11:01 pm

thx sich...
sabauku
Greenhorn
 
Posts: 3
Joined: Tue Oct 06, 2009 2:41 pm
Top
Post a reply

Return to DC Motor

Who is online

Users browsing this forum: No registered users and 17 guests