UART Fingerprint Reader

FYP Starter Pack, ICs, Voltage Regulator, Resistor, Capacitor......

UART Fingerprint Reader

Postby mashitah » Sat Feb 23, 2013 2:24 pm

i want to ask about my uart fingerprint. i try to connect the fingerprint module with usb-uart converter to my laptop.. unfortunately, when i open the gui and click open port, the gui hang and cannot do anything. i dont know why.. i have try so many times but still same.. i try use the Fingerprint Time Attendance Application gui and also Fingerprint Reader GUI but still have the same problem.. the default baud rate at the gui is 19600..
i also try to change the baud rate at the port at device manager to 19600 and also default 9600 but also cannot work..

what should actually to make this device working properly??
mashitah
Greenhorn
 
Posts: 3
Joined: Sat Feb 23, 2013 12:29 pm

Re: UART Fingerprint Reader

Postby robosang » Sat Feb 23, 2013 2:31 pm

Are you sure is 19600? I thought it should be 19200 :twisted:
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: UART Fingerprint Reader

Postby mashitah » Sat Feb 23, 2013 2:33 pm

the blue light from the fingerprint module also not on.. but why?? not enough power?? but i put 5v to the vcc
mashitah
Greenhorn
 
Posts: 3
Joined: Sat Feb 23, 2013 12:29 pm

Re: UART Fingerprint Reader

Postby mashitah » Sat Feb 23, 2013 2:36 pm

sory typing error 19200.. this default thing.. just choose.. :geek:
mashitah
Greenhorn
 
Posts: 3
Joined: Sat Feb 23, 2013 12:29 pm

Re: UART Fingerprint Reader

Postby robosang » Sat Feb 23, 2013 4:43 pm

a photo of the hardware would be helpful
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: UART Fingerprint Reader

Postby yonghui » Mon Feb 25, 2013 10:15 am

have u try to put it on other computer?
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm

Re: UART Fingerprint Reader

Postby gadgetng » Wed Feb 27, 2013 2:23 pm

It should be the connection/wiring from PC to the fingerprint reader. Pls double check/confirm.
gadgetng
Discoverer
 
Posts: 97
Joined: Tue Jul 24, 2012 11:20 am


Return to Electronic Component

Who is online

Users browsing this forum: No registered users and 13 guests

cron