5- IMU interfacing, multiplexer

Digital Fiber, Photoelectric, Laser Range, Optical, Temperature, Rotary Encoder, Ultrasonic, Gas, Gyro, Accelerometer, FlexiBend, Flexiforce, Compass......

5- IMU interfacing, multiplexer

Postby Chlorine » Mon Mar 08, 2010 12:03 am

Sorry for the inconvenient..
I need to know how to interface 5-IMU sensor
Chlorine
Greenhorn
 
Posts: 2
Joined: Mon Mar 08, 2010 12:00 am

Re: 5- IMU interfacing, multiplexer

Postby ober » Mon Mar 08, 2010 4:05 pm

5 degree IMU. If you are referring to the product of Cytron, it provide analog output (in voltage) from on board Accelerometer and Gyro. Basically, you connect to microcontroller ADC input (analog input). If there are 5 analog output, then you require 5 analog input at microcontroller.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: 5- IMU interfacing, multiplexer

Postby Chlorine » Tue Mar 09, 2010 12:05 am

Basically if i'm using a ADC in a pic with 10 channel.
Does the vref for both 5 analogous input is the same?
Chlorine
Greenhorn
 
Posts: 2
Joined: Mon Mar 08, 2010 12:00 am

Re: 5- IMU interfacing, multiplexer

Postby ober » Tue Mar 09, 2010 2:34 pm

It should be the same.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm


Return to Sensor

Who is online

Users browsing this forum: No registered users and 9 guests