DIY Project for CNC Machine.

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

Re: DIY Project for CNC Machine.

Postby ober » Tue Jun 29, 2010 12:01 pm

roywnc69 WROTE:or do i need to do my own program to run it? According to them, this is 'Plug & Play' PCI bus motion control card which develop with DSP & FPGA.
I hope someone can give me some idea about this yaa... ;)


Sorry, never use motion card before, DAQ card, Yes. Anyway most of the card will come with driver and library for user to develop their own GUI. Of course there should also be a simple sample program to show the operation.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: DIY Project for CNC Machine.

Postby roywnc69 » Tue Jun 29, 2010 2:17 pm

Thnxx Ober for the info.

that's means i got the right one. There is a driver & library with vb,vc and so on.
So...i hope my machine can make the 1st project this week... :D :P ;)

Thanks again ober...
roywnc69
Apprentice
 
Posts: 33
Joined: Sun Nov 22, 2009 3:02 pm

Re: DIY Project for CNC Machine.

Postby ober » Wed Jun 30, 2010 9:18 am

Hoping to see it soon
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1486
Joined: Wed Apr 15, 2009 1:03 pm

Re: DIY Project for CNC Machine.

Postby roywnc69 » Wed Apr 13, 2011 1:01 pm

Hello there...its been quite sometime i didn't post my project status here. So...finally its done and its works! :D
Ok, i going to upload my video here. Anybody can guide me how to do that?

Thank you for your cooperation.
roywnc69
Apprentice
 
Posts: 33
Joined: Sun Nov 22, 2009 3:02 pm

Re: DIY Project for CNC Machine.

Postby redips_id » Wed Apr 13, 2011 3:17 pm

I have never seen anyone upload video in this forum, maybe you can upload at youtube and give us the link.. :mrgreen: Anyway, very superb project, cannot wait to see that, CONGRATULATIONS! :)
Request for complete solution for FYP? Why don't request for graduation certificate?
redips_id
Discoverer
 
Posts: 82
Joined: Wed Jan 20, 2010 6:23 pm

Re: DIY Project for CNC Machine.

Postby roywnc69 » Fri Apr 15, 2011 10:28 am

Thanxx.. i will post a.s.a.p. ya. I'm in process editing my video. 8-)
roywnc69
Apprentice
 
Posts: 33
Joined: Sun Nov 22, 2009 3:02 pm

Re: DIY Project for CNC Machine.

Postby sich » Fri Apr 15, 2011 12:03 pm

Waiting...eagerly!
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm

Re: DIY Project for CNC Machine.

Postby roywnc69 » Tue Apr 19, 2011 11:17 pm

Hello there.. here is my cnc project.
roywnc69
Apprentice
 
Posts: 33
Joined: Sun Nov 22, 2009 3:02 pm

Re: DIY Project for CNC Machine.

Postby sich » Wed Apr 20, 2011 10:56 am

Awesome! What's the material you engrave in the video? Is it wood or polystyrene?
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm

Re: DIY Project for CNC Machine.

Postby sich » Wed Apr 20, 2011 11:07 am

roywnc69, can you post your project in Project Showcase?
You can read How to Share to know the format we suggest. More info is better. Thanks in advance! =)
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm

PreviousNext

Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 22 guests

cron