ifc power supply

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

ifc power supply

Postby bear » Wed Oct 06, 2010 6:01 pm

how to make external power supply for card such as bl02, bh02 so it will has own power supply.. dont want to use power supply from power card..
bear
Apprentice
 
Posts: 46
Joined: Tue Oct 05, 2010 2:11 am

Re: ifc power supply

Postby yonghui » Fri Nov 05, 2010 9:39 pm

hi,


the boards supply is always shared together from the power card, the communications need common ground. but for the motors u can use separate supply, not necessary the supply from power card. just connect the cable of the motor supply to ur own supply. check for the schematic of th board. using the power card actually provides some advantages in term of the overload, and reverse polarity protection.

regards,
yh
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 19 guests

cron